Selasa, 24 Januari 2012

Audi urban concept 2011

Audi sets out on new paths - the technology concept study, Audi is a 1 +1 seater urban vehicle for urban agglomerations. The electrically driven show car has four wheels, but it will fit any common automotive category. The Audi urban concept, which weighs only 480 pounds, brings elements of a racing car, a roadster, a car and a fun city cars together to form a radical new concept. He has the potential to become a trendsetter for a new mobility to be. 

 This vehicle is a prototype and can not be bought!

"How much car is needed to achieve urban mobility and driving pleasure to a whole new way?" This question was the starting point for the Audi urban concept. During the development work was the model of a glider in the design studio - as a model for lightweight, efficiency and reduction, to the principle "less is more". The result is a vehicle that does not fit any conventional thinking drawer - a vehicle that redefined the concept of driving fun and completely free of ballast.  The Audi urban concept focuses on the pure essence of riding, he gives freedom to a premium level.

He also offers the comfort and safety of a closed car - so he is far superior to any scooter. The engineering study, with its sleek body design and the exposed wheels is progressive and highly emotional, but also decidedly sporty and surprisingly comfortable. Two people can easily put together in the cabin of the Audi concept urban space. The roof can be opened by sliding. This innovative solution enhances driving pleasure, because the dome when the weather en route to remain open, it also allows a very quick breather. The finish of the show car has that perfection is the requirement for Audi. And his art reflects the full competence against the mark, especially the ultra-lightweight construction.  

Urban concept with the Audi opens up the brand with the four rings is an entirely new class of vehicle - at a premium level. At the same time Audi completes its range of future electric vehicles, which with the high-performance sports car R8 e-tron starts at the bottom. The Audi urban concept makes getting into the electric mobility easy - in the true sense of the word. The engineering study is aimed at people who are interested in technology and a passion for new forms of mobility, regardless of their age and status. He especially appeals to urban audiences that fits their lifestyle to a modern concept and the associated driving pleasure as well as a possible innovative leasing system.  The urban design of the Audi concept fundamentally new, but has some historical roots - in the Auto Union racing cars of the 30s.

Already they were conceptually far ahead of their time - they built ultra-light, their engines were mounted in the rear. And the big wheels were outside of the chassis in the room, another parallel. The Electro-painted in white pearl effect study of technology today - 3,219 millimeters long, 1678 millimeters wide, but only 1189 mm high - has a body, pushing on all the lines to the front. The greenhouse is built extremely flat, the wedge-shaped roofline runs down, while the side windows upincreases. Audi's typical urban contours give the concept a strong shoulder.  Accentuated in front of the rear wheel with an upright, forward inclined blade, the side view. The Speedrot painted contour looks like a roll bar, reminiscent of the high-performance sports car Audi R8.

Run down the flanks of wide body - that increases the floor area, which has two important functions: it generates downforce at higher speeds, and they can be used to charge the battery by induction - a very comfortable process.  The brand-typical single-frame grille bearing the four rings will appear on the Audi urban concept of a closed surface. They can be folded forward and then releases the charging port. The narrow LED headlamps are pulled out of the plastic body. The turn signals undergo an LED light conductor strips on the fenders. The panels rotate the wheels detached closely, the front when driving a beat with them. The plastic-designed rear lights with tail light and brake light integrated into the vehicle body and rotate the rear window at the top. The rear end conceals a small storage room, and he will wind up like a drawer.  The anterior segment of the glass house is designed to be movable - and this is an innovative idea, the concept of urban Audi has completely on their own. Mounted on rails, it can be pushed by hand to the rear, while it slides over the rigid posterior segment.

To drive, you can leave the roof open or close, as you wish. The engineering study is a Roadsters on demand - it does not need a retractable wheels and without a significant air-conditioning, closed the dome offers protection against rain and cooler air. As an alternative to urban concept with sliding roof, Audi has developed a second body variant - a Spyder with a flat, circular band of windows and with doors which open obliquely upwards.  The introduction to the concept occurs in urban Audi pushed back roof. Driver and passenger climbed over the curb in a tub - doors do not exist. Great agility is not required, a handle on the frame of the windscreen and special sections on the seating surfaces make boarding easier.  The show car provides two passengers. The driver and passenger sit side by side - the right seat is 30 inches back to provide enough clearance for the shoulders and arms remain. The two-seat pedestals are an integral part of the monocoque, which saves a large amount weight. They wear foam layers, which are made according to the dimensions of the customer - just like a race car.

The belts run through cutouts in the backs. The seat of the Audi urban concept is a bit like an aircraft cockpit, the position is very sporty. The driver can be adjusted to suit-aluminum pedals and the steering column. Both components can be moved in length to the pedals by 22 centimeters, the steering column for the entry 14 and also for the individual adjustment by 6 inches.  The steering column is exposed in the room - a strong, open profile in the center in an elegant design, almost horizontally mounted. On her back she carries a display of important messages. The steering wheel, small and hexagonal, integrated buttons and rollers to operate, with him, it is also the Audi drive select driving modes, the electric drive control. The whole interior of the art study is the strict dictates of the ultra-lightweight design subject. Runs under the Windshield a strong, also in the middle of open wing profile across the interior - a new instrument panel blank, it carries a satellite operator for the heatingand two large air vents.  Instead of a carpet mat covers a novel parts of the floor - originally developed in the sports shoe sector technical textile that repels water and is very durable. The seats are covered with cloth, on the edge of the foam pads trimmed with kangaroo leather. On-board tool set aluminum trim accents.  Also, the technical concept, the Audi is urban concept without precedent. The outer skin of the show car is made of carbon fiber-reinforced plastic (CFRP), the cell is it is a mix of a carbon fiber monocoque and aluminum structure.

This ultra-lightweight design lays the foundation for the extremely low curb weight of the engineering study of just 480 kilograms. The sophisticated suspension underscores the distinctive sporting character of the Audi urban concept. Wishbone, manufactured in a material combination of aluminum and carbon fiber lead to free-standing 21-inch wheels. Made in the so-called cladding technology, the wheels are very easy to build, their design varies the lamellar appearance of the Audi e-tron models. The tire size is as unusual as the whole car - it is 125/60 front and 145/50 rear.  The urban concept, the pushrod Audi uses technology from motor racing - as in a race car are its spring legs, inside of the monocoque placed almost horizontally. Four disc brakes take over the delay. The turning circle is less than nine meters - ideal for a city car. The rack and pinion needs thanks to the low vehicle weight of no power assistance. Deformation zones front and rear, and two air bags provide high level of passive safety. A novel assistance system helps the driver avoid collisions with pedestrians.  The battery is located, mounted transversely behind the seats. The lithium-ion battery that stores about 90 pounds in weight, 7.1 kWh of energy, of whom 5.7 kWh are available for disposal. The two electric motors of the study co-produce 15 kW (20 hp) continuous power and 47 Nm of torque. They sit between the rear wheels and drive it to a single-stage gear.  

The urban concept Audi accelerates in 16.9 seconds from zero to 100 km / h, 60 km / h are reached after about six seconds. With the torque of electric motors, which is available from the prior, the showcar sprints dynamic going on at the traffic lights. Its top speed is limited to 100 km / h. The radius is 73 km in the European driving cycle, the battery is at 400 volt AC in about 20 minutes later fully loaded with 230-volt household current in about an hour.  Instead of loading at the outlet is working intensively on the future of Audi charging technology. The term Audi Wireless Charging (AWC) is the non-contact charging by induction. The so-called infrastructure side, consisting of a coil and an inverter (AC / AC converter), the urban park on the root of the Audi concept placed and connected to the grid. The primary coil which is embedded in the plate, generated with 3.6 kW power, a high frequency alternating field. If the urban concept to disk drives, charging starts automatically - the alternating magnetic field induced on the infrastructure side of the air gap, an AC voltage in the secondary coil, which is integrated in the vehicle. He is rectified and fed into the electrical system, where it recharges the battery powered consumer or as a radiator.

The alternating field is built up only when a vehicle is above the surface, that presents no hazard to humans or animals dar.  The charging process stops by itself when the battery is fully charged, the driver can cancel it at any time. The efficiency of AWC is comparable with other charging technologies. Rain, ice or snow does not affect him. The new technology makes the charging of electric vehicles easy and extremely convenient. In a later stage they can also be integrated into transport infrastructure, such as equipment from car parks or residential streets.

Selasa, 03 Januari 2012

308 Hybrid HDi 2007

The next step in even greater environmental and acceptance of the diesel engine demonstrated at the Frankfurt Motor Show concept car 308 HybridHDi. Expected in 2010 will be the first vehicle 308 as the mark with this innovative drive concept on the market, which couples the excellent fuel economy of a HDi FAP engine with the power and zero emissions of an electric motor. The diesel-hybrid technology thus represents another important step to reduce fuel consumption dar. With the same performance, the HybridHDi reduced compared to conventional diesels, the fuel consumption and emissions by more than a third.

This vehicle is a prototype. It can not be bought!

With an average consumption of just 3.4 liters of diesel per 100 kilometers and CO2 emissions of just 90 g / km, the 308 Hybrid HDi is up 38 percent from the values ​​of a 308 HDi with comparable performance. In city traffic - where the share of electric motor operation is exceptionally high - the fuel consumption even at only 3.0 liters of diesel, resulting in a CO2 output of just 80 g / km mean - that represents a savings of 58 percent compared to the reference model. This is Peugeot's enormous potential of this drive concept impressively demonstrated. With the 308 HybridHDi Peugeot developed the concept of the diesel-hybrid continues until the planned start of production. Compared to the early 2006 presented the testbed HybridHDi 307 of the 308 HybridHDi the improvements are aimed primarily to the transfer of hybrid technology in the structure of the new 308 and adapting to future emissions standards in Europe. 

The engineers paid particular attention to the hybrid drive. This allowed the proportion of specific components from the previous concept car by around 30 percent to be reduced. The 308 HybridHDi thus shows already a near-standard configuration in which the performance of the drive unit unchanged at moderate consumption levels could be increased. Is powered by the 308 Hybrid HDi, which was shown at the IAA in a five-door version, and already the emission standard Euro 5 corresponds to a 80 kW (109 hp) diesel engine and a continuously operating 16 kW (22 hp) and 80 Nm payable electric motor (Permanentmagnet-Synchronmotor/PMSM). The total output of 96 kW is almost the same performance of the 308 HDi FAP, 2.0 liter displacement and 100 kW (136 hp).

The parallel hybrid power train is equipped with an automated six-speed manual gearbox (BMP6) coupled. The nickel-metal hydride battery (Ni-MH) delivers the latest generation of 200 volts and is housed in the spare wheel - this is no additional space is lost in the trunk. Needless to say, even the 308 Hybrid HDi FAP particulate filter system with a. While the overall performance of the 308 Hybrid HDi which correspond to an equivalent 308 HDi FAP, the HybridHDi at the pulling power far superior: For a whopping between acceleration, the diesel engine supported by the electric motor, the short period for up to 23 kW (32 hp) more power and provides 130 Nm more torque. In coasting or braking, the 308 Hybrid HDi recovers the kinetic energy and uses it to recharge the batteries. Using a special key, the all-electric ZEV mode (Zero Emission Vehicle) will be activated. In this case, the combustion engine only when strong acceleration or at high speeds is switched to.

The ZEV mode is ideal for city driving, because in this mode will cause no pollution or noise pollution. In the ZEV mode, the battery charge is sufficient for a distance of about three kilometers. By turning the ignition key, the engine is first started or not, but only put the system into operation. In automatic mode, the accelerator pedal is pressed, the vehicle is using the electric motor in motion. This is done on and off switching of the internal combustion engine via the "Stop and Start" feature. Depending on driving conditions, regulating the Power Train Management Unit (PTMU) the operation of the drive unit. The driver is informed at the request of a seven-inch multifunction color screen in 16:9 format in real time via the respective flow of energy currents. Control indicates the battery status and retrieved by the individual engine performance.

Kamis, 29 Desember 2011

2011 Ford Transit Connect Electric

Ford highlights at the Geneva Motor Show its commitment to global expansion of electric vehicles through a development version of the new Transit Connect Electric, as he is currently attending a fleet test in the UK. The light commercial vehicle uses the same battery and drive technology, which is on board the Transit Connect Electric station wagon later this year, its European-being, giving her debut in Germany.


This vehicle is a prototype. It can not be bought!

"With a greater variety of electric vehicles, we increase the acceptance of these environmentally friendly propulsion technology for our customers," said Bill Ford, executive chairman of Ford Motor Company. "This strategy is fully in line with our corporate tradition, the largest possible buyers circle to open up access to technical innovations. At the same time it is part of our vision, which has advanced as well as 'green' products as the basis for a competitive business model to the target and thus makes an important contribution to a better world. " The Ford Transit Connect Electric combo is a pure battery-electric powered version of the Ford Transit Connect with a long wheelbase (a light commercial vehicle).


These emission-free version was developed in close collaboration between Ford and the American-American company Azure Dynamics, which brings his patented "Force Drive" technology in the collaboration. This is an electric drive, which draws its energy from advanced lithium-ion battery packs from Johnson Controls-Saft a storage capacity of 28 kilowatt hours. The Ford Transit Connect Electric reached a top speed of 120 km / h, a range of up to 130 kilometers. The charging process is completed, depending on the discharge of the battery, on a European 230-volt standard power outlet into a maximum of ten hours.


Thanks to its technical and conceptual properties of the Ford Transit Connect offers the perfect base for an electric vehicle. It combines the driving dynamics of a car with a remarkable, precious cargo volume, a generous access to the cargo compartment, and with low acquisition and maintenance costs. Therefore characterized the Ford Transit Connect Electric by a 3.8 cubic meters of cargo space and can accommodate up to 410 kg payload. And battery-electric with the "Force Drive", the user of the Ford Transit Connect Electric, that is initially primarily to fleet operators, their spending on fuel specifically eliminate the quasi-city distribution. Already since December 2010 rolled out the Ford Transit Connect Electric on U.S. roads. During the year the compact zero-emission commercial vehicles is also on the European market. The funding for the Transit Connect Electric adaptation - in addition to LHD RHD are also available - roll as usual in the Ford Otosan factory in Kocaeli, Turkey from the tape. From here they can be transported without a powertrain for a dealer of Azure Dynamics in Europe, where it converted.


Also, sales in Europe takes a special dealer-network of Azure. As in the U.S., the Transit Connect Electric, both the brand logo of Ford as well as that of wearing Azure Dynamics. Further details around pricing, amenities and availability are Ford announced at a later date. "The Transit Connect Electric demonstrates our ambition, environmentally friendly drive systems, particularly through energy-efficient technologies and strategic partnerships to pave the way from the laboratory into the street," said Derrick Kuzak, product development, Ford vice president, worldwide group. "It is ideal for environmentally conscious fleet owners and an important part of the Future of Ford"Undo edits

Jumat, 02 Desember 2011

BYD e6-Eco

The BYD e6 electric vehicle is a crossover with five seats and an extended wheelbase of 2830 mm. Its generous size and its convenience to distinguish from other BYD e6 electric vehicle. Unlike electric vehicles from other manufacturers do the e6 a spacious cabin with generous head and legroom and plenty of storage space in the rear. In addition, the drive offers a powerful e6 by BYD's revolutionary new battery - lithium iron phosphate battery pack or large format. 


This vehicle can be bought!

Of his distinguished predecessors, the e6-Eco, the new design of the front and rear surface, which gives the e6-Eco a more innovative style. Safety features like side marker lights and new LED fog lamps are now standard equipment. The floor area in front of the rear seat has been redesigned and is now lower than before, to give passengers more legroom and comfort.The e6-Eco is equipped with a 75 kW engine and developed by BYD LFP battery to reach the under urban driving conditions, a range of 300 km. Thus, the e6-Eco is one of the world's electric vehicles with the highest range.

The estimated top speed of 140 km / h These characteristics make the e6 ideal vehicle for everyday use, even for city driving and long distances. In addition, the kinetic energy of the vehicle during braking, slowing down and rolls downhill through regenerative braking function is converted into electrical energy and stored in batteries. So improving the energy efficiency of the e6 and further its reach increases.Developed by BYD LFP battery can withstand high temperatures, high pressures and the impact was, offering excellent reliability and more than 2,000 full charge and discharge cycles. The system can detect leakage in the high voltage supply and automatically damage to the battery housings.

In the case of system failure or a repair need the battery is automatically switched off to protect drivers and passengers. In parked position receives the motor control of the drive motor and Sperr-/Entsperrbefehl sent through the appropriate procedures to ensure maximum safety when parking or starting.The charging of the e6 is comfortable and fast. The full charging of the e6 takes only 40 minutes when the 100-kW fast charging block is used and 6 hours with the standard Ladepol (similar to the shop in a private garage).The e6 is environmentally friendly, an electric vehicle with no direct emissions, because it emits no harmful emissions or environmentally critical pollutants or greenhouse gases.

The new LFP of BYD battery goes in the environmental philosophy a step further and includes only fully recyclable chemicals.On 1 May 2010 were the first all-electric BYD e6 taxis as part of an experimental project in Shenzhen by the band. On 27 BYD Co. Ltd. September 2010 celebrated the successful total distance of 600,000 kilometers of the 50 e6 taxis. Today they are driven a total of well over 2 million miles. BYD gained from this fleet a lot of valuable data for future research and development in the field of EV technology.

Selasa, 08 November 2011

Stromos 2010

German Cars For e the boundaries are blurred. What began with the original model Benni was consistent with its continued development - the new Stromos. It is based on the proven Suzuki Splash and with its features and flexibility in volume many uses as a fleet model. These paired it has the safety features of a sophisticated production vehicle with our innovative E-drive. In this combination of new Stromos charming and sensible at the same time - and a real shining light in the sky car!

This vehicle can now be purchased!

Design is the new Stromos not an end in itself. Appearance and functionality are integrated into a whole cohesive. Of the large headlights to the high-luminosity tail lights. And in between is a versatile interior concept that the elevated seating position, a foresighted driving and allows enough freedom for the most important features - your head. Because safety is - as elsewhere - even in fleet use of central importance. From ABS with electronic brake-force distribution over airbags for driver and front passenger, front side airbags and side impact protection and the new Stromos ISOFIXK is therefore thought of everything. Better safe than sorry. Electric Mobility is no longer just a dream. Just in the everyday life of fleet customers, they can be perfectly integrated: The combination of different drive systems and vehicle types that cover your individual mobility needs.

These electric vehicles is a symbol of environmental awareness, sustainability and innovation. With Stromos takes to drive a new drive concept that combines two worlds: Four full-sized seats and the everyday comforts of a conventional automobile can be combined with groundbreaking e-mobility. The filler neck is on the outlet. The energy is up 100 percent from renewable sources like wind and sunlight obtainable. Mobility becomes more cost effective for you and saves the environment damaging emissions - a win for all of us. Even in the emerging field of e-mobility, you can rely on the proven quality . Whether you need complete electrical drive systems, individual components or combinations -You get the high-voltage battery via the power electronics unit, by matching gears up for battery management systems, everything from a strong hand.